◆Basis information

Name: XCGS anti-static shielding bag

Nickname: Yin Yang bag

Appearance: Silver gray translucent

Surface resistance: 10^(8-11)Ω, 10^(6-9)Ω

Electrostatic shielding performance: <50NJ

Regular thickness: 0.075mm

Material structure: APET+CPP (harder texture)/APET+CPE (softer texture)

Personalization: can be customized according to customer needs

◆Technical Indicators

Inner layer surface resistivity: 10^(8-11)Ω, in line with the national standard "Electrostatic Shielding Packaging Bag Requirements and Testing Methods" (GB/T 39588-2020) The inner layer surface resistivity requirement of 10^3-10^11Ω.

Outer layer surface resistivity: 10^(8-11)Ω, in line with the national standard "Electrostatic Shielding Packaging Bag Requirements and Testing Methods" (GB/T 39588-2020) The outer layer surface resistivity requirement is less than 10^11Ω.

◆Application Range

It is suitable for the transportation and packaging of cutting-edge discharge-sensitive high-tech electronic products such as PCB boards, hard drives, memory/flash memory, optics/photoelectricity, 5G communications, LED chips, IC semiconductors, and microelectronic components.

◆Self-evaluation

★Because it not only has all the characteristics of anti-static packaging bags, but also has the characteristics of shielding external workers and external ionizing radiation. It has many effects such as high quality anti-static, anti frequency radiation, waterproof steam penetration, anti-corrosion, etc. It is often used to package sensitive devices that are sensitive to static electricity and are easily damaged by static electricity. It is the first choice for electrostatic packaging.

★I am XCGS anti-static shielding bags. XCGS has been focusing on anti-static packaging for 20 years. It has a large factory background and its quality is guaranteed. It has five bases and eight factories in China, and branches and offices abroad. Its business radiates to the world and can be achieved local procurement, fast delivery in different places.

▲Tips:

①The anti-static shielding bag should preferably be large enough to seal the entire product in it

The shielding bag should be sealed with a label or tape, or a zip-top shielding bag can be used to seal it. Placing ESD-sensitive electronic components in anti-static shielding bags is a good way to protect them from electrostatic discharge. But without a sealed anti-static shielding bag, it is impossible to provide complete anti-static protection!

②Eliminate the charge on the shielding bag

When receiving ESD sensitive components sealed in a shielding bag, be sure to place the closed shielding bag on an anti-static workbench before removing the product, this will help dissipate any charge that may accumulate on the surface of the shielding bag.

③Do not overuse shielding bags

If the shielding bag is not damaged in any way, it can basically be reused. However, if any damage, tears or excessive wrinkles are found on the shielding bag, such bags should be discarded.

④The shielding bag is not an ESD workbench

The anti-static shielding bag is only to prevent ESD sensitive products from being damaged by static electricity. If you are handling ESD sensitive products, use a properly grounded ESD workbench.

⑤ Do not use shielding bags to handle ESD sensitive products

Do not use a shielding bag as an "ESD Potholder" or "ESD Glove" to handle ESD sensitive products, as the shielding bag will not provide any ESD protection to the product.